[To...] Posted October 27, 2022 Share Posted October 27, 2022 Can someone clear up the air on how this can be done in Calypso? I only listed 1 characteristic that is not affected by C, but there a several others referring to same DRF that require a timing control from C. I just not sure how "simultaneous requirement" is applied using ANSI Y14.5-1982.MMB.jpgScreenshot 2022-10-27 103336.jpg Link to comment Share on other sites More sharing options...
[Ch...] Posted October 27, 2022 Share Posted October 27, 2022 Tom, Just checked, and best fit whether using "A + C" or "A + A + C" does not allow MMC(MMB) for -C- rotation. I know position has allowed MMC of symmetry planes for me in the past. What I would do in this case is create a theoretical circle whose geometry matches the symmetry plane, make sure ID/OD for MMC, etc. and diameter will be the length of C, etc... I've done this quite a bit in the past. I think there is an old guide somewhere from Ellison, etc. Good luck ! EDIT : found it.... not my doc just sharing ... Also this shows MMC of the slot itself which you should now be able to do with Symmetry Plane, however it is the same idea for a slot as a tertiary.True Position Slot with MMC.pdf Link to comment Share on other sites More sharing options...
[Ri...] Posted October 28, 2022 Share Posted October 28, 2022 Wouldn't this be that the OD is concentric to -A- and symmetric to -C-? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in