PC-DMIS Import/Export

[[Ri...]]

Yes, as it is a direct importer. 

 

The only other option would be the DMIS import, but that can be a hit/miss depending on how complex the program is. The PC-DMIS import is very successful. 

[[Ri...]]

Please sign in to view this quote.

You don't necessarily need a CMM with PC-DMIS, you need a licensed copy of PC-DMIS installed.

However, you can read PC-DMIS as a text file, you should be able to duplicate the program. You would have to understand PC-DMIS commands, which is not to difficult.

[[To...]]

Please sign in to view this username.

That is correct.

[[Br...]]

Hello,

 

I wrote a Knowledge Base article on this topic. Feel free to check it out!!

FAQ:

      - You have to have Calypso and Pcdmis on the same pc

      - It is a paid option so you would need to contact your Zeiss Aftermarket Sales Rep

      - As with any translator, you will need to "clean things up" after conversion

 

If Calypso and Pcdmis are not on the same system, the other route would be to export dmis out of Pcdmis and

Dmis import into Calypso.

 

 

[[Da...]]

Hi All,

I have tried this yesterday and it seems OK, however I had a program in Calypso where almost every feature was scanned, but after exporting to pc - dmis all features have touch points only. Is there any easy way to change this ?

[[Br...]]

 

HI Daniel,

 

If you are exporting from PC-DMIS, this question would be best directed to the PC-DMIS Importer team at Hexagon. From the Calypso perspective, our typical process is to open the feature strategy, remove the existing probing points, and then apply a scan strategy.

 

For more detailed information regarding the PC-DMIS to Calypso import process, please refer to the Knowledge Base section of the ZEISS Portal.

 

[[Ab...]]

https://portal.zeiss.com/knowledge-base?id=587980 is the Knowlege base article with information on PC-Dmis and calypso import

[[Na...]]

Yes you need both